Clarion Radio Release Keys

PC5 - 83
Releasing the radio is very straightforward with the Autoleads PC5-83 radio
release keys. Simply push the keys in through the holes until a click is felt and
then release the radio.

PC5 - 110
To release the Radio, insert the Autoleads PC5-110 radio release keys into the
holes in the top of the radio, push in until a click is felt, and then release the radio.

PC5 - 131
To release the Radio, you will first need to pull forwards the outer trim panel that
goes around the outside front edge of the unit. Once this has been removed,
insert the two Autoleads PC5-131 radio releasekeys down the sides until a click
is felt. The radio can now be released.

PC5 - 108
To release the radio, look under the bottom edge of the radio, two small
indentations can be seen at the rear lower edge of the front fascia. Two flat
strips need to be inserted at this location and pushed backwards about 2 inches.
With these wedges in place, the radio can be gently eased forwards taking care
not to put any pressure on the fragile side edges.