MG Radio Release Keys.
If you are removing the MG CD Player or Cassette Player using the pair of
Autoleads PC5-83 radio release keys simply insert the release keys into the small
holes on each side of radio, apply pressure outwards on the release keys whilst
pulling them towards you. The CD Player or Cassette player should now slide out.
If you need to remove the Radio using a 2.5mm Allent key or Torx T10 Secrewdriver
you will need to open the two small flaps either side of the fascia, and this will
reveal two allen keyed screws that are holdng the unit in. Using a 2.5mm Allen Key
or a Torx T10, unscrew the bolts couter clockwise until a small resistance is felt.
The bolts will not come out, but are moving a sliding bar at the side of the radio.
Once a slight resistance has been felt, the radio can be released.
2.5mm Allen Key
1 x Allen Key
£1.00
2.5mm Allen Key used to remove some MG units.
If you disconnect the power from the unit it will become locked, to unlock it you will need a radio code. MG Radio Codes can be purchased here for only £10.00 via serial number.
PC5-83
2 x MG radio release keys
£4.99
Set of 2 release keys used to remove the MG single din Cassette & CD Player found in most MG vehicles that do not need the 2.5mm
Allen Key or Torx T10 Screwdriver.
If you disconnect the power from the unit it will become locked, to unlock it you will need a radio code. MG Radio Codes can be purchased here via serial number.
